We will be showing you how to build the Orlandoo OH32A02 Step by Step!
This is what you should see when you open the box!
Let’s get started with Bag A!
Bearings for the OH32A02 Kit
Front Axle Assemble
Here is a little tip: If the screws are very small, just a magnet to stabilize it!
Front Axle Assembling
Front & Rear Axles!
Let’s move on to Bag B – Turnbuckles
Manual offers 1:1 diagrams for easy understanding
All turnbuckles assembled
Next up, Bag C – Gear Box
Kit version does not come with a motor! so make sure you grab one from: https://goo.gl/kfePbY
It does not come with Lipo ESC with LED Light Set, order one set now at: https://goo.gl/9Bq1Du
Rail Set Assemble
Bag D – Damper !
Comes with Plastic Dampers, get aluminum dampers at: https://goo.gl/HcuLHy
Universal Shafts also made of plastic
Bag F – wheels
It contains plastic rims and tires. Get upgrades here!
The following does not come with the car kit, so make sure you get them as well!
ESC + LED Light Set: https://goo.gl/Z2Egxf
Bag E – Car Body
It comes with a hard plastic body. You may want to apply putty and sand it down before colouring!
Orlandoo OH32A02 & OH32A01 comparison
Orlandoo OH32A02 and OH35A01 comparison
Orlandoo palm size crawler showdown
Hopefully you find this helpful.
Don’t forget to check out the OH32A02 Kit at: https://goo.gl/aqMQg2