For Beginner and Advanced racers, here are some tips and specs of some of the most popular chassis out there!
For Beginner and Advanced Racers
Yokomo 1/10 YD-2S RWD EP Drift Car Chassis Kit is the plastic composite version of YD-2 Plus (released in October) which has originally designed for low grip surface such as P-tile, concrete. The higher mount motor layout and 4 gear transmission with plastic one piece chassis will provide another type of flex point on chassis to perform more smooth and flexible drift feels for each drivers. Especially the front steering feels are the different, more roles on sideway and super natural drifting like real car.
The Yokomo 1/10 YD-2S Plus RWD Carbon Graphite Version EP Competition Drift Car Chassis Kit is with high mount motor layout for increasing more rear traction. However, it is a special design and renew the layout of the motor itself to prevent from the weakness of the high motor mount. In case of conventional high motor mount, a kind of sensitive on driving performance especially at the twisted corner section and also out of the corner, it will be less acceleration and more difficult in drive it.
It has been 1.5 years since YD-2 chassis kit was launched at RWD drifting market and dominating the competitive RC drift market in the world. And now Yokomo has improved its basic configuration and released YD-2E series as substitute for YD-2 series.
YD-2E and YD2E (with gyro) has improved its front section to bundled with New Steering and New Lower Suspension Arm in order to have chance to optimize the Ackerman Steering and more wider tread as well. So it will have more steering angle. For the rear section, LS Rear Lower Suspension Arm is going to be a standard bundled, Toe angle, Alignment of arms has renewed for more smooth and stable but faster drifting controls .
So, the chassis looks more slim and stylish but also deliver the different driving feels due to another type of chassis material. More light weight and higher response on drifting.
XEX spec.R is a perfect solution for those who could not give up on their RWD drifting dreams. It provides the perfect suspension geometry for the drifting, giving just enough steering angles while having the most appropriate ackerman in the broad area. We did all the work for you to have the perfect drift chassis, so all you have to do is simply to follow the assembly instructions! The drive train is the same combination of 27T counter gear and ridgid axle as AWD XEX, however, XEX’s acceleration work with high grip performance emphasizes the tail sliding volume, which gives you the feeling of driving the real vehicle.
OD 4th chassis kit “GALM (GALM)” is finally here. Although it is a full-fledged specification of carbon double deck + belt drive, it is easy to assemble chassis structure that even beginners can take with peace of mind. Equipped with an aluminum oil damper on the four wheels, adopting an inboard type suspension at the front prevents interference between the shock and the wheel even at the large steering angle while maximizing the performance of the shock. We also have a set with DAIS. Anyone can feel free to RWD drift without worrying about the compatibility of servos and mechanics. In addition, spur gear (92T), pinion gear (23T), hexagonal wrench (1.5mm, 2.0mm), simple wrench for wheel nut, turnbuckle wrench are attached. ※ This product is a chassis kit. Prop Set, Steering Servo, Speed Controller, Motor, Battery, Body, Tire, Wheel are not included so purchase separately.
So you are an experienced racer and you are looking for some more advanced chassis? The ones below are for you!
The Yokomo 1/10 YD-2 SX RWD EP Drift Car Chassis Kit is based of YD-2 S Plus, Team Yokomo has tuned further for Drift Competition and using high quality optional parts, as well as special parts designed for YD-2 SX. YD-2 has achieved two consecutive win at D1 10 Open world championship in Netherland and shown the excellence of driving at any type of surface at several competition, and the usage among RWD drift chassis are going to the World champion as well. However, Yokomo has not stop the engineering effort for the ultimate type for more aggressive drifting under the condition of super slippery surface with low grip supplied tires. Initial ‘S’ at YD-2S stands for specialized for Slippery spec.
The high-end competitive drift chassis kit YD-2 EX has released as a part of YD-2 series which drove various glory on competitive scene! More narrowed main chassis is the mat graphite finish and raises it as racing appearance and will provide more well balanced traction along with new designed front balk-head. Aluminum shock tower has renewed with the increased hole for both shock and upper arm for providing more updated set up for leading competitive RWD drift scene.
The 2nd chapter of Vacula II. All new RWD spec “Vacula II” Introducing the new chassis kit for Vacula II On top of the simple and sleek aspects of the original design, we have added some edgy mechanical touch to the chassis. The RWD drive train creates the realistic drift performance. Vacula II with all new chassis is now available.
Get Yokomo Chassis now at: https://goo.gl/PWQPTe
Upgrade Yokomo Chassis at: https://goo.gl/Cp8PSa
Get Overdose Chassis now at: https://goo.gl/T1ph5u
Upgrade your overdose GALM & Vacula II at: https://goo.gl/RP2v5G
— rcMart We Help People Have Fun with RC
Facebook Page: https://www.facebook.com/rcmart
Instagram : https://www.instagram.com/rcmart2001