Xpress announced that the High CG Battery Mount and Rear ESC Mount and Multi-Hole Rear Arm Shock Mount for GripXero D1 is available now! All these change the characteristics of your GripXero D1 chassis for you to improve the handling and gain more rear grip!
Let’s check out it now!
The first one is Multi-Hole Rear Arm Shock Mount Set (XP-10489). It increases the adjust-ability of your rear shock angles and setup with these lower rear shock mounts. Secures tightly on the lower graphite arm.
The second one is the High CG Rear ESC Mount (XP-10550). By relocating your ESC to the back of the shock tower and ontop of the wheel axle line, you can get more grip from your tires during on and off power! This is possible due to shifting of the center of gravity to the rear of the car and higher than the wheel axle line!
The final one is High CG Battery Mount (XP-10488). It can gain more chassis roll which in turn lets the car easier to turn into the corner through the increased momentum at corner entry!
Available now on rcMart.
Don’t miss the GripXero D1!
Combining R&D obtained from the Xpresso and Execute series, the GripXero is born! Featuring the best of both worlds, combining them together to produce a high performance RWD drift car! With new elements such as the Inboard Front Suspension (IFS) to further tailor the chassis towards throwing large slides!
- High Flex Matte 2.5mm Graphite Main Chassis
- High Flex Matte 2.0mm Graphite Vertical Topdeck With Changeable CG with Gyro Mount and Esc Mount
- High Flex Matte 3.0mm Graphite Lightweight Front and Rear Arms
- High Flex Matte 3.0mm Graphite Rear Shock Tower; low/high shock hole choice
- And more…
Find out more: https://bit.ly/2XjDKry
More Xpress products on rcMart: https://bit.ly/2Ez3XZa
rcMart We Help People Have FUN with RC