Xray announced the New Version GTXE 1/8 electric on-road GT kit is coming soon. The GTXE project follows typical development progress at XRAY: 3D models were first printed & tested, and after successful test results the production molds were machined. To ensure perfect fitment of all parts, all pieces are individually tested during the development phase and then are tested on track to ensure maximum reliability and performance.
Let’s check out it now!
The all-new high-volume differentials were developed to improve vehicle control and consistency over long runs and enhance reliability. The differentials feature larger capacity cases and larger internal gears with more teeth for an improved differential moment. The larger oil volume and the shape of the gear teeth reduce overheating. The diff pins have a new, stronger design to improve reliability.
All-new front lower and upper arms are molded using a harder material to improve response and to maintain bind-free suspension movement in dusty or hot conditions. The longer rear arms help create more forward traction and allow quicker acceleration out of the corners. The rear arms are also molded from an extra hard material for consistent and responsive performance. The updated front upper arm geometry allows for less caster to improve the steering characteristics, increase the overall steering and help reduce tire wear.
The rear uprights feature new larger outer 8x16x5mm ball-bearings for increased reliability and life-span. To expand the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The wheelbase position is adjustable using 2 shims along the lower suspension pin. The rear uprights feature integrated geometry adjustments including camber, upper and lower roll center and wheelbase.
The longer camber link accommodates the revised roll center positions on the new uprights.
The narrow rear suspension holders work together with the new longer rear arms to improve overall grip, forward traction and allow earlier acceleration at corner exit.
The GT shocks were redesigned with new shock caps and cell shock membranes. The all-new shock caps feature 4 bleeding holes for more equal oil bleeding and a more precise shock rebound setting. The cell shock membranes have less air gap that helps to generate more grip. The redesigned shape of the composite bushings results in free operation even in dusty conditions.
The larger front and rear anti-roll bars help control chassis roll, increase corner speed and improve the stability of the car. The front & rear roll bars are easily mounted to the bulkheads and can be adjusted using the connected linkages. Manufactured from spring steel material, anti-roll bars of different thickness are optionally available for fine-tuning.
- All-new front & rear diffs with increased oil capacity increase traction & consistency
- All-new front upper arm with reduced caster improves the steering characteristics and decreases tire wear
- All-new harder lower front arms increase response and corner speed
- All-new rear upright with 8x16x5mm outer ball-bearings for increased reliability and lifespan
- All-new narrower rear suspension arm holders
- All-new longer rear arm for increased stability & grip
- All-new shock membrane with reduced air gap generates more grip
- All-new shock cap with 4 vent holes to compliment the new shock membrane
- Longer rear camber link
- 2.8mm front and 3.0mm rear anti-roll bars
Coming soon on rcMart, stay tuned for more information.
More Xray products on rcMart: https://bit.ly/2EexdDG
rcMart We Help People Have FUN with RC