Yeah Racing had introduced the conversion kit for Tamiya M07 that upgrades the original chassis to the race-oriented car. It doesn’t matter you have/don’t have Tamiya M07 chassis, you can get some parts to build a FWD M-chassis . For the Tamiya M07 Conversion Kit, Yeah Racing released two versions
What is the difference between the two of them?
Let’s check out it now!
For Yeah Racing Competition Level Conversion Kit For Tamiya M07 #CK-M07R
Competition Level Conversion Kit For Tamiya M07 #CK-M07R
Carbon Fiber Parts Come with
- Carbon Fiber Chassis
- Carbon Fiber Upper Desk
- Carbon Fiber Front & Rear Shock Tower
For the Aluminum Parts Come With
- Aluminum GearBox
- Aluminum Front/Rear Suspension Mount
- Aluminum Steering Knuckle
In CK-M07R, it included several degrees of insert (for the racer to select the perfect one), turnbuckle attached, aluminum Hex Wheel hub, and the parts of the weight increase.
What you need to buy for using this conversion kit?
In not courting the hardware parts (ESC, Motor, Servo, Gryo, Batteries, Receiver)
If you don’t have Tamiya M07, you need to buy
M07 Carbon Fiber Reinforced C Parts Uprights 2 pcs Black (TAMIYA 54810)
M07 Carbon Fiber Reinforced D Parts Suspension Arms 2 pcs Black (TAMIYA 54811)
M07 Spur Gear w/ Counter Gear White (TAMIYA 51601)
M07 33mm Double Cardan Joint Shaft 2 pcs Black (TAMIYA 42312)
50mm Damper Set (DSG-0050/DBB-2050)
7075 Hard Coated Motor Gear/Pinions 06P 25T #MG-06P25T
Wheelset (1 pc)
All you need in this link
>> CK-M07R: http://bit.ly/2Bj6UJC <<
Unbox Video
Race orientated conversion kit for Tamiya’s M07, converts the plastic decks to full graphite and providing users with a vast amount of options for suspension alignment. The kit comes with the Yeah Racing oil filled sealed gear differential for the utmost consistent cornering and power delivery! Your choice of building in one of the three (210mm, 225mm and 239mm) wheelbases, making puting any M chassis body possible. Your choice of mounting the body through the body posts in the front bumper or the included adapter to use the kit Tamiya M07 holes!
Find out more: https://bit.ly/35B3SOY
For Yeah Racing Sport Conversion Kit For Tamiya M07 #CK-M07S
It is the cheaper version compare to the competition level of CK-M07R, it positioning in a sport level and normal use.
What you need to buy for using this conversion kit?
Same as the competition level #CK-M07R, you need to get the same parts to build
- M07 Carbon Fiber Reinforced C Parts Uprights 2 pcs Black #TAMIYA 54810
- M07 Carbon Fiber Reinforced D Parts Suspension Arms 2 pcs Black #54811
- M07 Spur Gear w/ Counter Gear White #51601
- M07 33mm Double Cardan Joint Shaft 2 pcs Black #42312
- 50mm Damper Set
- 7075 Hard Coated Motor Gear/Pinions 06P 25T #MG-06R25T
And the following items
- M07 Ball bearings
- Aluminum Ball Bearing Steering Set Blue For Tamiya M07 #TAMC-035BU
- Aluminum Hex Adaptor Set 12x5mm For 1/10 RC Touring Drift Crawler BlackGear Differential
All you need in this link
>> CK-M07R: http://bit.ly/32ludOS <<
Economical priced conversion kit for Tamiya’s M07, converts the plastic decks to nylon plates and providing users with a vast amount of options for suspension alignment. Your choice of building in one of the three (210mm, 225mm and 239mm) wheelbases, making putting any M chassis body possible. Your choice of mounting the body through the body posts in the front bumper or the included adapter to use the kit Tamiya M07 holes!
Find out more: https://bit.ly/2VbRErj
–