Yokomo released more information about the upcoming BD9 1/10 Touring Car kit on the official website. The Yokomo BD9, All of plastic composite materials are made in Japan with newly designed mold, this is a big challenge for Yokomo to release a brand new car like BD9. Every single part has been tested one by one at several types of tracks in Japan and other countries. Yokomo’s Ace pilot Ronald already shown us to achieve the track record in first ride early this week in Germany by using just BD9 new chassis. The car looks very conservative changes but the very aggressive approach for ensuring the racing drive feels more easy at the serious racing scene. This is the car everybody feels more advanced in driving technique just out of the box car. The configuration in the box is ready to race.

Let’s check out the new features of this Yokomo BD9 now!

12412

New Features

  • NEW!! Aluminum connected center bulkhead (Super Narrow)
  • NEW!! Graphite main chassis
  • NEW!! Center back born system
  • NEW!! Aluminum bell crank
  • NEW!! F/R Long lower suspension arm (New material)
  • NEW!! Graphite molded front steering block (New material)
  • NEW!! Graphite molded F/R hub carrier (New material)
  • NEW!! Solid Aluminum servo mount
  • NEW!! Bearing support stabilizer
  • NEW!! Lightweight/Minimize Gear differential (38T)
  • NEW!! Aluminum center pulley (20T)
  • NEW!! Double joint universal
  • NEW!! One touch battery holder (Glass tape unnecessary)
  • Aluminum turnbuckle
  • Axon BD 9 exclusive big bore ultra short damper
  • Axon BD 9 exclusive front progressive spring/rear linear spring
  • Precision bearing
  • Includes aluminum and steel screw for bulkhead, upper and lower deck

312412

By narrowing the width of the bulkhead, the supple flexibility that made use of chassis flex became possible. It is easy to fit various road conditions, realizing high traction. In addition, screws that fix the upper and lower bulkhead and upper deck are bundled with two types of aluminum and steel, and it is possible to change the flex by selecting according to the situation.

23124

To support high power and flex chassis, the center pulley was supported and supported side to side and adopted a design that enables symmetrical fixation to the chassis together with the motor mount was adopted, and driving efficiency was improved. It is also possible to fix the center bulk and the post which also serves as the battery stopper with the upper deck by adding a spacer, so you can also adjust the front and rear flex balance.

23124

A carbon graphite roll plate is newly adopted that controls the chassis roll accurately and controls the chassis behavior at cornering.

213

The fixing of the battery is not a glass tape stopper that affects the twist of the chassis, but it is a battery holder system that can float to a certain extent. It is also possible to prevent the battery from falling off, saving you the trouble of replacing.

515

By carefully examining every single material you use, parts that realize high breakage resistance will enhance survival performance in intense races. It also leads to a reduction in running costs, allowing users of various levels to enjoy more RC races. Especially the front and rear suspension arms that are worried about breakage fulfill the improvement of rigidity while maintaining the running performance and are greatly enhancing crash resistance.

2421245

Shock absorbers before and after adopt high big bore Ultra short shock specially designed for BD 9, born in collaboration with AXON. In addition, the spring also adopted the BD 9 exclusive design product of the progressive type before the chassis balance and the linear type afterwards. It accurately absorbs minute unevenness of the road surface and behavior of the machine, always felt traction, making the machine controllable.

4512

Steering bell crank and center link essential for improving steering response is made of aluminum.

 

Original Post on Yokomo website: https://bit.ly/2CE8TLr

Coming on rcMart, Stay tuned for more information!

Don’t miss the newest car from Yokomo!

Yokomo YR-X12 2019 Edition 1/12 Competition Pan Car Kit EP

The YRX-12 is updated to suit the tracks of the 2019 season. The changes will provide a car with faster corner speed, offering you incredible lap times. The redesigned aluminum main chassis is included as standard in the kit. The chassis is milled in places to promote a lower center of gravity, which is needed for high-grip circuits to prevent traction rolls. The steering response has been improved by moving the center damper forward. The YRX-12 creates a lot of rear traction, and the improved steering response allows the minimum steering angle to be used and the car to be better balanced through the corners.

Find out more: https://bit.ly/2Cm3pph

Unbox Video: https://www.youtube.com/watch?v=KA1ita5f3nM&t=1s

More Yokomo Product on rcMart: https://bit.ly/2PlCtYe

 

Previous Blog

Yokomo | BD9 2019 1/10 Touring Car Kit @Available on End of October 2018 #MRTC-BD919

https://bit.ly/2yv6CO6

Yokomo | BD9 2019 1/10 Touring Car Kit @Mystery Mask Revealed #MRTC-BD919

https://bit.ly/2yekk8C

rcMart We Help People Have Fun with RC

http://www.rcMart.com

Social Media

Facebook Page: https://www.facebook.com/rcmart

Instagram: https://www.instagram.com/rcmart2001

Youtube: https://www.youtube.com/user/dinballian