Yokomo announced the “Curved Slide Rack” for YD-2E and S series is coming soon. Installing high precision Slide Rack will reduce the backlash around the steering wheel, making the steering feel more rigid and decreasing the shaking. The curved slide rack was designed to prevent interference with linkage rod at steering angle.
Let’s check out the detail now!
It allows the drifter to feel more freedom in the deepest angle drifting moment. The rack is installed with a forward tilt angle in order to reduce the bump steer, which is the tendency of the wheel of a car to steer itself as it moves through the suspension stroke. The body roll and suspension motions will not influence the car to turn more sharply than the driver anticipates.
The aluminum slide rack is made with a hard anodizing which improves wear resistance and features smooth operation being held by 6 bearings. Because the bearing post is an eccentric camshaft, it reduces the rattling of the steering to the limit, there is also an effect in greatly improving the direct feeling and prevent from the juddering.
* Graphite upper deck and aluminum bulkhead spacer are not included in the set for YD-2S series.”
Coming soon on rcMart, stay tuned for more information!
This is Yokomo 1/10 YD-2E RWD EP Competition Drift Car Chassis Kit. It has been passed 1.5years since YD-2 chassis kit has launched at RWD drifting market and dominating the competitive RC drift market in the world. And now Yokomo has improved its basic configuration and released YD-2E series as a substitute for YD-2 series. YD-2E and YD2E (with gyro) have improved its front section to bundled with New Steering and New Lower Suspension Arm in order to have a chance to optimize the Ackerman Steering and more wider tread as well. So it will have more steering angle. For the rear section, LS Rear Lower Suspension Arm is going to be a standard bundled, Toe angle, Alignment of arms has renewed for more smooth and stable but faster drifting controls.
- 4 gear down Transmission
- Aluminum Motor Mount Plate
- Long Spring
- High Angle Steering System for RWD
- Full Ball Bearing
- Rear Universal Shaft
- Standard and Shorty Battery
- And more…
Find out more: https://bit.ly/2DquHtL
This is Yokomo 1/10 YD-2S RWD EP Drift Car Chassis Kit. This new YD-2S is the plastic composite version of YD-2 Plus (released in October) which was originally designed for low grip surface such as P-tile, concrete. The higher mount motor layout and 4 gear transmission with plastic one-piece chassis will provide another type of flex point on chassis to perform more smooth and flexible drift feel for each driver. Especially the front steering feels are the different, more roles on sideways and supernatural drifting like a real car.
- 4 gear rear transmission
- Gear differential
- New design sealed gear box
- Narrow scrub steering block
- RWD high angle steering system
- 4 wheel independent double wishbone suspension
- Rear universal shaft
- And more…
Find out more: https://bit.ly/2PuDulF
More Yokomo Product on rcMart: https://bit.ly/2PlCtYe
rcMart We Help People Have Fun with RC
Facebook Page: https://www.facebook.com/rcmart