Details of Tamiya NEW chassis TC-01 RC Formula E GEN2 Car 58681
Big attention to the body and chassis that tell a new era!
Formula E, also known as “F1 for electric vehicles”. It has been held since 2014, mainly in urban courses such as famous resort areas, not in general closed circuits. This is an electric radio control car assembly kit that reproduces the Formula E GEN2, a second-generation machine developed for this race and introduced in 2018. The low and unique form of the front and rear tires covered with a body cowl is realistically reproduced with polycarbonate. Separate parts are included for the cockpit protective device “Hello”, rearview mirror, and large rear diffuser that also acts as a bumper. Also, markings are divided into black and silver, and a set of stickers for the championship (official) color with a light blue line. For the chassis, we adopted TC-01, a shaft drive 4WD with in-board suspension specifications.
Adopting shaft drive 4WD chassis with inboard suspension, TC-01
The chassis uses shaft drive 4WD TC-01 with inboard suspension in order to match the low vehicle height. A motor is mounted on the center of a monocoque frame with high rigidity and the propeller shaft transmits power back and forth. Equipped with an oil-filled gear diff. 4-wheel independent double wishbone suspension with long arm specifications. An inboard type that operates a horizontal oil damper vertically with a push rod and rocker arm. By adjusting the amount of spacers, you can set the camber angle, caster angle, and toe angle. In addition, the suspension arms / uprights use common parts on the front, back, left, and right to provide high maintainability.
田宮全新車架 TC-01 58681 Formula E – 車身與底盤完美結合
近期熱爆田宮雙星車架 TC-01，起初時公佈果條黑蚊蚊既影片，好多聰明既師兄已經估到係 Formula E 喇。自2014年起，Formula E 主要既賽事都係城市中進行，TC-01 主要係基於 Formula E GEN2 上，即係於 2018年推出既第二代車型。市面上遙控車 F1 都係行兩驅，而呢架 TC01 就係行四驅，行軸，前後上下雙搖臂，用 TA07 牙差，IFS 油壓配置，未見有防傾桿，電池架結構就可以行到短電，有冇跟短電用既膠件就未知，留意返一點，伺服器官方標明一定要使用但重心款，車頭有跟頭鏟同海綿，而輪距同輪胎尺寸就同 TT01 / TT02 一樣喇。相信呢一架車可以吸引到一班未接觸過遙控車既人入坑！
Tamiya 58681 Specifications:
- Length 430mm
- Width 188mm
- Height 99mm
- Wheelbase 257mm (same with TT-01 / TT-02)
- Tire width / diameter = front and rear 24 / 64mm
- Frame = integrally molded monocoque
- Drive system = vertical motor / shaft drive 4WD
- Differential gear = oil-filled gear diff
- Steering = 3-split tie rod type
- Suspension = inboard type 4-wheel double wishbone
- Damper = CVA oil damper both front and rear
- Gear ratio = Kit standard 24T 6.56: 1
TC-01 Chassis Photos:
More Tamiya products at rcMart.com: https://www.rcmart.com/Tamiya